# Registration Form Configuration is empty?

**URL:** <https://talk.getindico.io/t/registration-form-configuration-is-empty/474>\
**Category:** Administrators\
**Created:** [June 25, 2018, 3:48pm UTC](https://talk.getindico.io/t/registration-form-configuration-is-empty/474 "2018-06-25T15:48:15Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![kingspride](https://talk.getindico.io/letter_avatar_proxy/v4/letter/k/73ab20/32.png) [@kingspride](https://talk.getindico.io/u/kingspride)\
**Post date:** [June 25, 2018, 3:48pm UTC](https://talk.getindico.io/t/registration-form-configuration-is-empty/474/1 "2018-06-25T15:48:15Z")

</div>

Hi,

recently I took over our local, small indico installation.

so far, so good - now I wanted to create a Test conference to get used to the system.

Unfortunatly, I wasn’t able to configure the Registration Form, it just stays completely blank.  
No matter what computer, browser or User Role I took, it always stays empty:

 ![image](https://talk.getindico.io/uploads/default/original/1X/30219c362333fb8b72228921b7d6339ed6175fde.png)

I suspect some module within Indico isn’t working properly. Can somebody tell me where I could investigate? Log files within my Indico Installation Directory are not very helpful since they only seem to log access history.

Thanks in advance,  
William K. from Fritz-Haber-Institut Berlin

---

<div class="post-metadata">

**Author:** ![ThiefMaster](https://talk.getindico.io/user_avatar/talk.getindico.io/thiefmaster/32/509_2.png) [@ThiefMaster](https://talk.getindico.io/u/ThiefMaster)\
**Post date:** [June 25, 2018, 3:52pm UTC](https://talk.getindico.io/t/registration-form-configuration-is-empty/474/2 "2018-06-25T15:52:54Z")

</div>

This is usually caused by Indico being accessed by a URL that does not match `BASE_URL` in indico.conf - that results in the AJAX requests loading the templates for the registration form to fail due to Same-Origin-Policy violations (you can probably see messages about that in your browser’s developer console).

The solution for this is to use the correct url in indico.conf and then reload/restart uwsgi so the updated config is actually used.

---

<div class="post-metadata">

**Author:** ![kingspride](https://talk.getindico.io/letter_avatar_proxy/v4/letter/k/73ab20/32.png) [@kingspride](https://talk.getindico.io/u/kingspride)\
**Post date:** [June 26, 2018, 7:49am UTC](https://talk.getindico.io/t/registration-form-configuration-is-empty/474/3 "2018-06-26T07:49:17Z")

</div>

Thanks,  
it’s fixed now!